Lucite Shelf Lovely

Consider y'all-selves STYLE SLAPPED full on about the face!!!! Yasssss! Presenting lucite shelf & vintage brass bracket REALNESS:

SO thrilled at how this project turned out! I just LURV everything about it-- the combo of materials: lucite, brass and cast iron. The fact that the candleholders appear to be floating sculpture. Also j'adore that I was able to utilize the wall space BEHIND the shelf for even MORE value hanging style storage. Also lurving: the whole situ doesn't feel heavy. Sometimes display shelves that are mounted really high like this have a tendency to visually weigh down the room, but this just feels so light and airy to me.

And TRUST that it's super SAFE-- there are two screws and two anchors in each bracket. Speaking of, the installation (thx Dyl) was really straightforward and just involved measuring the overall length of the wall, the lucite shelf and then dividing out equally where each brackets were to go. Then we traced the bracket holes, installed them and put the shelf in place. When we started, it looked like this:

I'd say for the $30 or so I spent on this project, total lucite shelf dreamzzzz have been fulfilled! What do y'all think?!

Chic Shelf 2

Y'all, last week, major dreamzzz were fulfilled when I scored a lucite shelf to display my Dansk cast iron candleholder hoard on:

Now, this fabulousness needs to be hung, and hung well-- if y'all know what I'm talkin' about! OH SHIOT! Seriously, the candleholders are cast iron, so safety must be accomplished here, but I'm certainly not sacrificing chic-ery in the process either. I'm not THAT giving! I want the shelf to appear as if it's floating on the wall, like this:

I've seen those brackets for glass shelves-- surely there's something out there for an 8' long shelf? I mean, 8' is pretty standard in terms of shelf length, right? Here goes PJ down the diy rabbit hole...see folks, this shiot happens to me ALL THE TIME. Cool idea, then trying to find the pieces and parts to make said cool idea a reality-- isn't always cool. In fact hardly EVER. Many, many a day/week/month is spent searching all over for the right piece to make an idea work. And more oft than not, I have to end up making what I need. Guess that's how I got my DIY groove on in the first place. Custom IS next to Godliness. But for this, I really didn't sink too much time into finding a potential bracket, b/c we were already trolling Big Reuse when we found the shelf, it didn't take too long to uncover this baby, which, naturally, someone had put in a corner...the SHADE:

This is a chrome, glass door metal bracket of sorts (think it was originally intended for a shower door?)...it's almost as long as the shelf and has pre-existing mounting holes. It's almost a perfect fit on one side of the shelf. And it's only $8. This place is SERVING ME SERIOUS VALUE, y'all!

There's gonna need to be some hardcore safety mounting to my wall for this scenario-- but honestly, y'all, ALL mounting should be safe -- YES! I'll also have to secure the lucite shelf from below (note the pre-existing holes on underside of bracket) for even more OCD safety. In theory, this SHOULD work. I think. Dylan, cast here as 'hunky engineer', seems more confident about this method, but kindly reminds me that the SAFEST solution would be to use L brackets...how thoughtful. 'Cause y'all know looking at a narsty bracket holding up all my cast iron sculpture is the very definition of artful display. But what if my L brackets were pretty AND functional? Enter lucite L bracket from stage right, betch:

Are you kidding me with THIS? GORG! The problem here is these brackets are custom and run $15 EACH. I need at least 4. Kinda spendy for me, since the shelf was only $5. Then I started thinking about alternate L brackets made from metal that I wouldn't mind looking at and immediately I thought of brass! Holla! If y'all aren't aware, brass is baaaaaack! Way back. And the combo of brass and lucite is giving me a raging case of style chills. Taking to the interwebs like a brass bat outta hell, here's what I dug up:

Simple, straightforward and available in a few sassy finishes from Signature Hardware, but the polished brass shiot cost $32.95 EACH. How rude.

These antiqued brass babies from Liz's Antique Hardware are also kinda hawt:

But at $95 EACH they got real ugly, real quick. Damn! Why has brass gotta break a betch?! These kids from House of Antique Hardware are cute, and at $11.95/each, they're not cra cra, but I'm not convinced I could write home about them:

Then, I started searching for generic, simple brackets that I could potentially spray paint gold. Rabbit hole, right? SEE!!! Though, gotta say that the spray on metallics don't always melt in my mouth. But then shut the F&$K y'all, look what I found on Ebay! WHAT?!?!?!?:

2-set of vintage Baldwin brass shelf bracket babies for $10 value dollas!!! Betch got me 2 sets (total 4 brackets) for $20 + shipping!!!! Now, that's some good and tasty, DIY y'all...Yum!

I mean. #brassobsessed. Needless to say, I'm MORE THAN happy about these brackets and how amazing they're going to look paired with my lucite shelf! Be sure to check back for the big brass betch REVEAL soon!